Marmitek SWM1P Instrukcja Użytkownika Pobierz pdf (Strona 19)

SWM1P™

address. With this any other sunblinds or roll-down shutters can return to their

own Preset position. If the sunblind comes from a Preset position, the sunblind

module will also send an OFF command at the Preset address.

The sunblind module will not respond if the sunblind already is in the Preset

position.

Lock function

During for instance maintenance of the sunblind or painting

near the sunblind, the Lock key can temporary block the

sunblind module.

MIND: Always turn off the power during maintenance of the motor or

sunblind module!

MIND: If the module is set from the Lock function into the program-

ming mode the Lock function will automatically be cancelled.

Block the sunblind module

Push the Lock key simultaneously with the Down key for more than 5 seconds.

The sunblind actuator is completely blocked for every control (manual and via

mains). The motor stops immediately as soon as the Lock key is pushed. If the

Lock key is pushed less than 5 seconds, the motor will continue its movement

after releasing the Lock key.

MIND: Check by means of local control and remote control if the

sunblind module is blocked before starting maintenance!

MIND: Take no chance and switch off the power if there are any people

in the house!

Switching on sunblind module

Press the Lock key simultaneously with the Up key for more than 5 seconds.

The sunblind module works as usual again.

MIND: Check if the sunblind can move freely before you cancel the lock

mode!

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 47 48

Brak uwag

Marmitek SWM1P Instrukcja Użytkownika Strona 19